Basic Installation Process For Air To Water Heat Pumps

Installing an air to water heat pump can be hard, but can be understood with ease as long as you have the proper instructions. If you are interested, we’ve got you covered. This article will walk you through the basics of õhk vesi soojuspumba paigaldus. Without further ado, let’s start:

Air to water heat pump installation

The configuration of an air to water heat pump is generally easy since the controls and piping are comparable to those of conventional boilers. The system includes both interior and exterior devices that need installation. The outdoor device is a huge unit that is often visible outside the home. This equipment draws air from the environment, and then pressurizes it to produce warm air. Installing and connecting the interior units to radiators, underheated floors, or warm water lines follows. 

When placing the outside unit, the contractor will choose a location with enough airflow and minimum obstacles. The technician will clamp the device to the pavement and attach it with supports so that it cannot move. 

Integration of the air to water pump components

The wiring and connections must be made between the interior cylinder and the outside unit. The interior unit will be linked to the heaters and other heat-releasing systems inside the home. Depending on the size of your house and the length between the interior and outdoor units, wiring may require piercing a hole in the ground. Your technician will then link them via electric and refrigeration connections. 

Final adjustments

After the setup has been done, some final adjustments will be required to ensure that the heating system operates well. Many air to water heat pumps have sensors, which must be fitted for the pumps to deliver heat readings to your heat regulator.